Apara liphaephe tsa ceramic tsa silicon carbide tse hanyetsanang

Tlhaloso e Khutšoanyane:

Silicon Carbide ceramic lined pipes: Reaction bonded silicon carbide (SiSiC kapa RBSIC) ke thepa e sa sebetsaneng hantle, e loketseng ka ho khetheha bakeng sa li-abrasive tse matla, likaroloana tse mahoashe, lihlopha, mahloriso, ho felloa ke metsi le tse ling. E sebelisoa haholo indastering ea merafo, indasteri ea tšepe, indasteri ea ts'ebetso ea likorale, indasteri ea lik'hemik'hale, indasteri ea ho etsa thepa e tala, ho tiisa mechine, phekolo ea lehlabathe le ho bonahatsa joalo-joalo.


  • Boema-kepe:Weifang kapa Qingdao
  • New Mohs hardness: 13
  • Lisebelisoa tsa mantlha:Silicon Carbide
  • Lintlha tsa Sehlahisoa

    ZPC - moetsi oa ceramic oa silicon carbide

    Li-tag tsa Sehlahisoa

     

    Liphaephe tsa ceramic tsa Silicon Carbide:

    Apara Resistant Silicon Carbide PipeReaction bonded silicon carbide (SiSiC kapa RBSIC) ke thepa e sa sebetsaneng hantle, e loketseng ka ho hlaka bakeng sa ho hloekisoa ka matla, likaroloana tse mahoashe, ho hlopha, ho tsepamisa mohopolo, ho felloa ke metsi 'meleng le ts'ebetso e meng.

    E sebelisoa haholo indastering ea merafo, indasteri ea tšepe, indasteri ea ts'ebetso ea likorale, lik'hemik'hale
    indasteri, indasteri ea ho etsa thepa e tala, ho tiisoa ha mechine, phekolo e entsoeng ka lehlabathe le ho bonahatsa joalo-joalo The hardness e babatsehang le ho hanyetsa abrasive, e ka sireletsa ka katleho karolo eo ho hlokahalang ho apara tšireletso, e le ho lelefatsa bophelo ba tšebeletso ea thepa.
    Litlhaloso:

    Ntho

    Yuniti

    Lintlha

    Mocheso oa kopo

    1380 ℃

    Botenya

    G/cm3

    ~3.02

    Porosity e bulehileng

    %

    <0.1

    Matla a ho kobeha -A

    Mpa

    250 (20℃)

    Matla a ho kobeha -B

    MPa

    280 (1200 ℃)

    Modulus ea elasticity-A

    GPA

    330(20℃)

    Modulus ea elasticity -B

    GPA

    300 (1200℃)

    Thermal conductivity

    W/mk

    45 (1200℃)

    Coefficient ea katoloso ea mocheso

    K-1 × 10-6

    4.5

    Regidity

    /

    13

    Alkaline e thibelang asiti

    /

    e kgabane

     1. Fektheri View

    Sebopeho le boholo bo fumanehang:
    Botenya: ho tloha ho 6mm ho isa ho 25mm
    Sebopeho se Tloaelehileng: poleiti ea SISIC, Pipe ea SISIC, SiSiC Three Links, SISIC Elbow, SISIC Cone Cyclone.
    Tlhokomeliso: Lisaese tse ling le sebopeho li teng ha u kopa.
    Sephutheloana: 
    Ka lebokoseng la mabokose, le phuthetsoe ka pallet ea lehong e tlositsoeng e nang le boima ba 20-24MT/20′FCL.
    Melemo ea bohlokoa:
    1. Ho hanyetsa ka mokhoa o babatsehang, ho hanyetsa tšusumetso le ho hanyetsa kutu;

    2. Botebo bo babatsehang le ho hanyetsa mocheso o babatsehang ho fihlela ho 1350 ℃
    3. Ho kenya habonolo;
    4. Bophelo bo bolelele ba tšebeletso (bo ka makhetlo a 7 ho feta ba ceramic ceramic le makhetlo a 10 ho feta ba
    polyurethane

    Moralo oa phala e nang le lesela la ceramic:

    Lisebelisoa tsa Ceramic: RBSiC, SiSiC, SSiC, 99.5% Alumina, 99% Alumina, 95% alumina

    • Liphaephe, tlhahiso ka kakaretso;
    • Lipoleiti, poleiti e khanyang
    • Lithaele, lithaele tsa ceramic.

    3.1

    Paterone ea angle impact abrasion Ho khopama ha angle angle e tlase
    Ha phallo ea thepa e hohlang e fihla sebakeng se sa tebang kapa e feta e bapileng le eona, mofuta oa moaparo o bang teng ha ho hohlana o bitsoa sliding abrasion.

    Li-ceramics tsa silicon carbide tse tsoetseng pele li fana ka khanyetso ea ho roala le ho hanyetsa kutu lithaele tsa ceramic le lesela. Lihlahisoa tsena li netefalitsoe hore li na le lisebelisoa tsa ho tsamaisa, ho sebetsa le ho boloka. Lithaele tsa rona li ka hlahisoa ka botenya ho tloha ho 8 ho isa ho 45mm. ho bohlokoa ho etsa bonnete ba hore o ka fumana lihlahisoa tse hlokahalang. SiSiC: Ho thatafala ha Moh ke 9.5 (Bothata ba Moh e Ncha ke 13), e nang le khanyetso e babatsehang ea khoholeho ea mobu le ho bola, ho senya ho babatsehang - ho hanyetsa le ho thibela oxidation. E matla ka makhetlo a 4 ho isa ho a 5 ho feta nitride bonded silicon carbide. Bophelo ba tšebeletso ke linako tse 5 ho isa ho tse 7 ho feta lisebelisoa tsa alumina. MOR ea RBSiC ke 5 ho linako tse 7 tsa SNBSC, e ka sebelisoa bakeng sa libopeho tse rarahaneng haholoanyane. Ho roala lesela la ceramic le sa sebetseng le sebetsa hantle ho ntlafatsa ts'ebetso ea tlhahiso, katleho ea ts'ebetso, phokotso ea litšenyehelo tsa tlhokomelo le phaello ea phaello.

    Li-ceramics tse nepahetseng li na le tsebo ea lintho tse bonahalang, tsebo e sebelisitsoeng le tsebo ea boenjiniere. Sena se ka etsa bonnete ba hore tharollo e molemohali e fanoa ho bareki ba rona. Lithaele tsa silicon carbide ceramic le lining li atisa ho sebelisoa lits'ebetsong tse kang maholiotsoana, li-tubes, chutes, hoppers, liphaephe, mabanta a conveyor le mekhoa ea tlhahiso. Tsamaisong, ho na le lintho tse tsamaeang tse thellang holim'a metsi. Ha ntho e thella holim'a thepa, butle-butle e senya likarolo ho fihlela ho se letho le setseng. Libakeng tse phahameng tsa ho apara, sena se ka etsahala khafetsa 'me sa baka mathata a mangata a theko e boima. Mohaho o ka sehloohong o bolokoa ka ho sebelisa thepa e thata haholo, joalo ka silicon carbide ceramics le alumina ceramics e le lesela la sehlabelo. Ka nako e ts'oanang, li-ceramics tsa silicon carbide li ka tšoarella nako e telele pele li hloka ho nkeloa sebaka, bophelo ba tšebeletso ea silicon carbide ceramic bo bolelele ba makhetlo a 5 ho isa ho a 7 ho feta lisebelisoa tsa alumina.

    Lithaele tsa Silicon Carbide (2)

    Apara e hanyetsanangLithaele tsa Ceramic tsa Silicon Carbide le Thepa ea Marang-rang:
     Ho hanyetsa lik'hemik'hale
     Motlakase oa ho itšireletsa
     Ha ho na khoholeho ea metjhini le ho hahloa
     E ka nkeloa sebaka

    Melemo ea Ceramic WearE hanyetsanangLithaele & Linings:
     E ka sebelisoa moo ho nang le mamello e thata kapa li-linens tse tšesaane li hlokahalang
     E ka sebelisoa ho nchafatsa libaka tse seng li ntse li tloaetse ho roala
     E ka sebelisoa ka mekhoa e mengata ea ho hokela joalo ka welding le likhomaretsi
     Tloaelo e etselitsoeng lits'ebetso tse ikhethileng
     E thibela ho bola haholo
     Tharollo ea ho fokotsa ho roala ha bobebe
     E sireletsa likarolo tse tsamaeang tse tlas'a maemo a holimo
     E ipabola haholo ebile e sebetsa ho feta litharollo tsa phokotso ea liaparo
     Mocheso o phahameng haholo oa tšebeliso o fihlang ho 1380°C

      mmexport1532414574091

     

    1. Indasteri ea tšepe

    Sistimi ea ho tsamaisa: lebili la bakete Bai, disc, hopper Du, silo, apron e tsamaisang lebanta, tee ea trolley, ho amohela hopper

    Sistimi ea ho kopanya: silo e kopanyang, silinda ea ho kopanya ea Dao, silinda ea bobeli ea ho kopanya, disc e kopanyang, moropa o kopanyang, sekhechana, poleiti ea pelletizing.

    Sintering system: Beneficiation hopper ka tlas'a sekirini se thothomelang, chute ea lipalangoang tse tala, pokello ea lerōle la leholiotsoana le liphaephe, mokelikeli oa fan.

    2. Indasteri ea samente:

    Sistimi ea ho pshatla lejoe la mokoetla le sistimi e tala le ea mafura pele ho homogenization: chute, hopper, moqomo oa lebanta.

    Sisteme e tala ea leloala: vane e tataisang ea karohano, khoune ea karohano, leloala le otlolohileng ho ea ho leholiotsoana, leholiotsoana, leloala la mafura (tšepe ea bolo), ntlo ea karohano, khoune e ka hare, phala ea mashala e pshatlehileng.

    Leloala la mafura (tšepe ea bolo ea tšepe): ntlo ea karohano, khoune e ka hare, phala ea mashala e pshatlehileng, phala e khutlisetsang phofo

    3. Indasteri ea boema-kepe

    Hopper e tsitsitseng bakeng sa berth, hopper bakeng sa mochini oa mabili a bakete, hopper e tsitsitseng bakeng sa seteishene sa phetisetso ea lebanta, hopper bakeng sa ho laolla sekepe

    4. Indasteri ea ho qhibilihisa

    Sistimi ea ho tsamaisa: chute ea hlooho, silo (moqomo o bohareng, bin ea mohatla), sekoaelo se thothomelang, sekoti sa coke, sekoti sa metering

    Sistimi ea ho kopanya: hopper hopper, motsoako oa mantlha (oa bobeli).

    Sistimi ea ho halika: pompo ea bin e le 'ngoe, tšupu ea calcine, hopper ea ho beta, molora oa molora, sekoti sa bin se mahareng

    5. Indasteri ea lik'hemik'hale:

    Sistimi ea ho tsamaisa: hopper, silo

    Sistimi ea ho tlosa lerōle: phala ea ho tlosa lerōle, setsoe, casing ea fan le impeller, leholiotsoana

    6. Indasteri ea mashala:

    Sistimi ea ho sebetsana le mashala: chute, hopper, silo

    Sistimi ea ho hlatsoa mashala: leholiotsoana le hatelletsoeng, leholiotsoana le se nang khatello lihlahisoa tse tharo, leholiotsoana le sa hatelleng lihlahisoa tse 'ne, leholiotsoana la mahloriso.

    Sistimi ea ho tsamaisa: liphaephe, setsoe, phala, hopper, silo, boema-kepe ba kabo

    7. Morafoindasteri:

    Sistimi ea ho tsamaisa: silo ea hopper

     

    Li-Ceramics tsa Refractory
    Apara e hanyetsanang
    Leholiotsoana la Sehlopha sa Merafo
    Motsoako oa PU
    Motsoako oa Polyurethane
    Sisic Lined Steel
    Refractory ceramic
    SSIC e sireletsang mokotla
    Sleeve sa tšireletso sa RBSIC
    Silicon Carbide Burner Nozzle
    Silicon Carbide Nozzle Tube
    Lisebelisoa tsa E-Cigarette
    Li-Ceramics tsa Refractory
    Kiln Furniture
    Ho hanyetsa Mocheso o Phahameng
    Reaction Bonded Silicon Carbide
    Thepa ea tšireletso ea sesole
    Khahlanong le ho phunya
    Tšireletso ea Abrasion
    E hanyetsanang
    Ts'epe e sa beng le mabali
    E Entsoe Chaena Li-Ceramics Tse Hanyetsang Motsoako oa Polyurethane
    China Compound PU
    China Motsoako oa Polyurethane
    Alumina Ceramic
    Tube
    1650c Mocheso o Phahameng oa Sic Tube
    E entsoe ka China Wear-Resistant Ceramic Composite PU
    Li-Ceramics tsa Silicon Carbide tse phahameng tsa Presicion
    Ring ea Silicon Carbide e Phahameng ea Bohloeki
    Likarolo tsa Ceramic tse sa tloaelehang tsa Silicon Carbide
    Likarolo tsa Ceramic
    Lisebelisoa tsa Ceramic tsa Silicon Carbide
    Lisebelisoa tsa Ceramic
    E entsoe ka China Wear-Resistant Ceramic Composite Sisic Lined Steel
    Karolo ea Ceramic
    E entsoe ka China Wholesale Certified Wear-Resistant Ceramic Composite Polyurethane
    Bothata bo Phahameng
    92% Alumina
    E entsoe ka China Industrial Wear-Resistant Ceramic Composite Polyurethane

     


  • E fetileng:
  • E 'ngoe:

  • Shandong Zhongpeng Special Ceramics Co., Ltd ke e 'ngoe ea litharollo tse ncha tsa silicon carbide ceramic China. SiC tekheniki ea ceramic: Ho thatafala ha Moh ke 9 (Bothata ba Moh e Ncha ke 13), e nang le khanyetso e babatsehang ea khoholeho ea mobu le ho bola, ho senya ho hoholo - ho hanyetsa le ho thibela oxidation. Bophelo ba tšebeletso ea sehlahisoa sa SiC bo bolelele ba makhetlo a 4 ho isa ho a 5 ho feta 92% ea lisebelisoa tsa alumina. MOR ea RBSiC ke 5 ho linako tse 7 tsa SNBSC, e ka sebelisoa bakeng sa libopeho tse rarahaneng haholoanyane. Ts'ebetso ea quotation e potlakile, thomello e joalo ka ha e ts'episitsoe 'me boleng ha bo na letho. Re lula re phehella ho phephetsa lipakane tsa rona le ho khutlisetsa lipelo tsa rona sechabeng.

     

    1 SiC ceramic fektheri 工厂

    Lihlahisoa tse Amanang

    Moqoqo oa Marang-rang oa WhatsApp!