Lipoleiti tsa silicon carbide le lithaele

Tlhaloso e Khutšoanyane:

Reaction bonded silicon carbide (SiSiC kapa RBSIC) ke thepa e sa sebetsaneng hantle, e loketseng ka ho hlaka bakeng sa ho hloekisoa ka matla, likaroloana tse mahoashe, ho hlopha, ho tsepamisa mohopolo, ho felloa ke metsi 'meleng le ts'ebetso e meng. E sebelisoa haholo indastering ea merafo, indasteri ea tšepe, indasteri ea ts'ebetso ea likorale, indasteri ea lik'hemik'hale, indasteri ea ho etsa lihlahisoa tse tala, ho tiisa mechine, ho phekola ka holim'a lehlabathe le ho bonahatsa joalo-joalo


  • Boema-kepe:Weifang kapa Qingdao
  • New Mohs hardness: 13
  • Lisebelisoa tsa mantlha:Silicon Carbide
  • Lintlha tsa Sehlahisoa

    ZPC - moetsi oa ceramic oa silicon carbide

    Li-tag tsa Sehlahisoa

    Reaction bonded silicon carbide (SiSiC kapa RBSIC) ke thepa e sa sebetseng hantle, e leng
    haholo-holo a loketse bakeng sa matla abrasive, mahoashe likaroloana, classification, mahloriso, dehydration le
    lits'ebetso tse ling. E sebelisoa haholo indastering ea merafo, indasteri ea tšepe, indasteri ea ts'ebetso ea likorale, lik'hemik'hale
    indasteri, indasteri ea ho etsa thepa e tala, ho tiisa ka mochini, kalafo e entsoeng ka lehlabathe le ho bonahatsa joalo-joalo.
    Ka lebaka la boima bo babatsehang le khanyetso ea abrasive, e ka sireletsa ka katleho karolo eo ho hlokahalang ho apara
    tshireletso, e le ho lelefatsa bophelo ba tšebeletso ea lisebelisoa.

    U ka tseba joang le ho fumana lipoleiti tsa boleng bo holimo tsa silicon carbide, lithaele, li-liner?

    Lithaele tse manganga tsa silicon carbide, li-liner, liphaephe li ntse li sebelisoa haholo indastering ea merafo.

    Lintlha tse latelang ke tsa litšupiso tsa hau:

    1. Foromo le ts'ebetso: 
    Ho na le mekhoa e mengata ea SiC 'marakeng. Re sebelisa litlolo tsa 'nete tsa Sejeremane. Litekong tsa laboratori tsa boemo bo holimo, sehlahisoa sa rona sa Khoholeho ea mobu ㎝³ tahlehelo e ka fihla ho 0.85 ± 0.01;

    2. Ho thatafala:

    Lithaele tsa SiCli hlahisoa ka ZPC: boima bo bocha ba Mohs: 14.55 ± 4.5 (MOR, psi)

     

    3. Boima ba 'mele:

    Tekanyo ea lithaele tsa ZPC SiC e ka ba 3.03+0.05.

     

    4. Boholo le Bokaholimo:

    Lithaele tsa SiC tse hlahisoang ka ZPC ntle le mapetsong le li-pores, tse nang le bokaholimo bo bataletseng le likhutlo tse tiileng le likhutlo.

     

    5. Lisebelisoa tsa ka hare:

    Li-silicone carbide li-resistant liner / lithaele li na le lisebelisoa tse ntle le tse ts'oanang tsa kahare le kantle.
    Haeba u na le lipotso, ka kopo ikutloe u lokolohile ho ikopanya le rona:[imeile e sirelelitsoeng]

    Lithaele tsa Silicon Carbide (2)
    Litlhaloso:

    Ntho

    Yuniti

    Lintlha

    Mocheso oa kopo

    1380 ℃

    Botenya

    G/cm3

    ~3.02

    Porosity e bulehileng

    %

    <0.1

    Matla a ho kobeha -A

    Mpa

    250 (20℃)

    Matla a ho kobeha -B

    MPa

    280 (1200 ℃)

    Modulus ea elasticity-A

    GPA

    330(20℃)

    Modulus ea elasticity -B

    GPA

    300 (1200℃)

    Thermal conductivity

    W/mk

    45 (1200℃)

    Coefficient ea katoloso ea mocheso

    K-1 × 10-6

    4.5

    Regidity

    /

    13

    Alkaline e thibelang asiti

    /

    e kgabane

     1. Fektheri View

    Sebopeho le boholo bo fumanehang:
    Botenya: ho tloha ho 6mm ho isa ho 25mm
    Sebopeho se Tloaelehileng: poleiti ea SISIC, Pipe ea SISIC, SiSiC Three Links, SISIC Elbow, SISIC Cone Cyclone.
    Tlhokomeliso: Lisaese tse ling le sebopeho li teng ha u kopa.
    Sephutheloana: 
    Ka lebokoseng la mabokose, le phuthetsoe ka pallet ea lehong e tlositsoeng e nang le boima ba 20-24MT/20′FCL.
    Melemo ea bohlokoa:
    1. Ho hanyetsa ka mokhoa o babatsehang, ho hanyetsa tšusumetso le ho hanyetsa kutu;

    2. Botebo bo babatsehang le ho hanyetsa mocheso o babatsehang ho fihlela ho 1350 ℃
    3. Ho kenya habonolo;
    4. Bophelo bo bolelele ba tšebeletso (bo ka makhetlo a 7 ho feta ba ceramic ceramic le makhetlo a 10 ho feta ba
    polyurethane

    Paterone ea angle impact abrasion Ho khopama ha angle angle e tlase
    Ha phallo ea thepa e hohlang e fihla sebakeng se sa tebang kapa e feta e bapileng le eona, mofuta oa moaparo o bang teng ha ho hohlana o bitsoa sliding abrasion.

    Li-ceramics tsa silicon carbide tse tsoetseng pele li fana ka khanyetso ea ho roala le ho hanyetsa kutu lithaele tsa ceramic le lesela. Lihlahisoa tsena li netefalitsoe hore li na le lisebelisoa tsa ho tsamaisa, ho sebetsa le ho boloka. Lithaele tsa rona li ka hlahisoa ka botenya ho tloha ho 8 ho isa ho 45mm. ho bohlokoa ho etsa bonnete ba hore o ka fumana lihlahisoa tse hlokahalang. SiSiC: Ho thatafala ha Moh ke 9.5 (Bothata ba Moh e Ncha ke 13), e nang le khanyetso e babatsehang ea khoholeho ea mobu le ho bola, ho senya ho babatsehang - ho hanyetsa le ho thibela oxidation. E matla ka makhetlo a 4 ho isa ho a 5 ho feta nitride bonded silicon carbide. Bophelo ba tšebeletso ke linako tse 5 ho isa ho tse 7 ho feta lisebelisoa tsa alumina. MOR ea RBSiC ke 5 ho linako tse 7 tsa SNBSC, e ka sebelisoa bakeng sa libopeho tse rarahaneng haholoanyane. Ho roala lesela la ceramic le sa sebetseng le sebetsa hantle ho ntlafatsa ts'ebetso ea tlhahiso, katleho ea ts'ebetso, phokotso ea litšenyehelo tsa tlhokomelo le phaello ea phaello.

    Li-ceramics tse nepahetseng li na le tsebo ea lintho tse bonahalang, tsebo e sebelisitsoeng le tsebo ea boenjiniere. Sena se ka etsa bonnete ba hore tharollo e molemohali e fanoa ho bareki ba rona. Lithaele tsa silicon carbide ceramic le lining li atisa ho sebelisoa lits'ebetsong tse kang maholiotsoana, li-tubes, chutes, hoppers, liphaephe, mabanta a conveyor le mekhoa ea tlhahiso. Tsamaisong, ho na le lintho tse tsamaeang tse thellang holim'a metsi. Ha ntho e thella holim'a thepa, butle-butle e senya likarolo ho fihlela ho se letho le setseng. Libakeng tse phahameng tsa ho apara, sena se ka etsahala khafetsa 'me sa baka mathata a mangata a theko e boima. Mohaho o ka sehloohong o bolokoa ka ho sebelisa thepa e thata haholo, joalo ka silicon carbide ceramics le alumina ceramics e le lesela la sehlabelo. Ka nako e ts'oanang, li-ceramics tsa silicon carbide li ka tšoarella nako e telele pele li hloka ho nkeloa sebaka, bophelo ba tšebeletso ea silicon carbide ceramic bo bolelele ba makhetlo a 5 ho isa ho a 7 ho feta lisebelisoa tsa alumina.

    Apara Lithaele tsa Ceramic tsa Silicon Carbide le Thepa ea Marang-rang:
     Ho hanyetsa lik'hemik'hale
     Motlakase oa ho itšireletsa
     Ha ho na khoholeho ea metjhini le ho hahloa
     E ka nkeloa sebaka

    Melemo ea Lithaele le Lithaele tse Thibelang Keramic Wear:
     E ka sebelisoa moo ho nang le mamello e thata kapa li-linens tse tšesaane li hlokahalang
     E ka sebelisoa ho nchafatsa libaka tse seng li ntse li tloaetse ho roala
     E ka sebelisoa ka mekhoa e mengata ea ho hokela joalo ka welding le likhomaretsi
     Tloaelo e etselitsoeng lits'ebetso tse ikhethileng
     E thibela ho bola haholo
     Tharollo ea ho fokotsa ho roala ha bobebe
     E sireletsa likarolo tse tsamaeang tse tlas'a maemo a holimo
     E ipabola haholo ebile e sebetsa ho feta litharollo tsa phokotso ea liaparo
     Mocheso o phahameng haholo oa tšebeliso o fihlang ho 1380°C

    IMG_20180723_154430_副本2  mmexport1532414574091

    1  khanya ea letsatsi

     

    3.1mmexport1527604875015


  • E fetileng:
  • E 'ngoe:

  • Shandong Zhongpeng Special Ceramics Co., Ltd ke e 'ngoe ea litharollo tse ncha tsa silicon carbide ceramic China. SiC tekheniki ea ceramic: Ho thatafala ha Moh ke 9 (Bothata ba Moh e Ncha ke 13), e nang le khanyetso e babatsehang ea khoholeho ea mobu le ho bola, ho senya ho hoholo - ho hanyetsa le ho thibela oxidation. Bophelo ba tšebeletso ea sehlahisoa sa SiC bo bolelele ba makhetlo a 4 ho isa ho a 5 ho feta 92% ea lisebelisoa tsa alumina. MOR ea RBSiC ke 5 ho linako tse 7 tsa SNBSC, e ka sebelisoa bakeng sa libopeho tse rarahaneng haholoanyane. Ts'ebetso ea quotation e potlakile, thomello e joalo ka ha e ts'episitsoe 'me boleng ha bo na letho. Re lula re phehella ho phephetsa lipakane tsa rona le ho khutlisetsa lipelo tsa rona sechabeng.

     

    1 SiC ceramic fektheri 工厂

    Lihlahisoa tse Amanang

    Moqoqo oa Marang-rang oa WhatsApp!