Saka bututun carbide silicon mai juriya

Takaitaccen Bayani:

Sanya bututun yumbu mai jujjuyawa na Silicon Carbide: ZPW-Silicon Carbide yumbu shine ingantaccen kayan jurewa, wanda ya dace musamman don abrasive mai ƙarfi, ƙananan barbashi, rarrabuwa, maida hankali, bushewa da sauran ayyukan. An yi amfani da ko'ina a cikin ma'adinai masana'antu, karfe masana'antu, murjani sarrafa masana'antu, sinadaran masana'antu, albarkatun kasa-yin masana'antu, inji sealing, surface sandblasted jiyya da kuma reflector da dai sauransu The m taurin da abrasive res ...


  • Port:Weifang ko Qingdao
  • Sabon taurin Mohs: 13
  • Babban albarkatun kasa:Silicon Carbide
  • Cikakken Bayani

    ZPC - silicon carbide yumbu masana'anta

    Tags samfurin

    Saka mai juriyaSilicon Carbide yumbu liyi bututu:

    Saka Bututun Silicon Carbide ResistantZPW-Silicon Carbide yumbu shine ingantaccen kayan jurewa, wanda ya dace musamman don ƙaƙƙarfan abrasive, ƙananan barbashi, rarrabuwa, maida hankali, bushewa da sauran ayyukan.

    Ana amfani dashi sosai a masana'antar hakar ma'adinai, masana'antar karfe, masana'antar sarrafa murjani, sinadarai
    masana'antu, albarkatun kasa-masana'antu, inji sealing, surface sandblasted jiyya da kuma reflector da dai sauransu The kyau kwarai taurin da abrasive juriya, shi zai iya yadda ya kamata kare part inda bukatar sa kariya, don haka kamar yadda ya tsawaita rayuwar sabis na kayan aiki.
    Ƙayyadaddun bayanai:

    Abu

    Naúrar

    Bayanai

    Zazzabi na aikace-aikace

    1380 ℃

    Yawan yawa

    G/cm3

    · 3.02

    Bude porosity

    %

    0.1

    Karfin lankwasawa -A

    Mpa

    250 (20 ℃)

    Karfin lankwasawa -B

    MPa

    280 (1200 ℃)

    Modulus na elasticity-A

    GPA

    330 (20 ℃)

    Modulus na elasticity -B

    GPA

    300 (1200 ℃)

    Ƙarfafawar thermal

    W/mk

    45 (1200 ℃)

    Coefficient na thermal fadadawa

    K-1 × 10-6

    4.5

    Tsauri

    /

    13

    Acid-proof alkaline

    /

    m

     1. Duban Masana'antu

    Akwai Siffa da Girma:
    Kauri: daga 6mm zuwa 25mm
    Siffa ta yau da kullun: farantin SISIC, bututun SISIC, SiSiC Hanyoyi uku, SISIC Elbow, SISIC Cone Cyclone.
    Bayani: Akwai sauran girma da siffa akan buƙatun.
    Marufi: 
    A cikin akwatin kwali, cushe a cikin pallet ɗin katako mai ƙyalli tare da nauyin net ɗin 20-24MT/20′FCL.
    Babban fa'idodi:
    1. Kyakkyawan juriya na lalacewa, juriya mai tasiri da juriya na lalata;

    2. Excellent flatness da kyau kwarai zazzabi juriya har zuwa 1350 ℃
    3. Sauƙi shigarwa;
    4. Tsawon rayuwar sabis (yana kusan sau 7 fiye da na yumbu alumina da kuma sau 10 fiye da na
    polyurethane

    Zane na bututu tare da rufin yumbu:

    Abubuwan yumbu: RBSiC, SiSiC, SSiC, 99.5% Alumina, 99% Alumina, 95% alumina

    • Bututu, samarwa gaba ɗaya;
    • Faranti, farantin haske
    • Fale-falen buraka, yumbura.

    3.1

    Samfurin tasirin kusurwa mai ƙanƙan daɗaɗɗen kusurwa
    Lokacin da kwararar abin da ke lalata ya faɗo saman lalacewa a wani kusurwa mara zurfi ko ya wuce daidai da shi, nau'in lalacewa da ke faruwa a cikin juzu'i ana kiransa lalatar zamewa.

    Babban yumbu na siliki na carbide yana ba da juriya da juriya da lalata yumbu da fale-falen rufi. An tabbatar da waɗannan samfuran lalacewa na kayan aiki a cikin isarwa, sarrafawa, da tsarin ajiya. Za a iya samar da fale-falen mu tare da kauri daga 8 zuwa 45mm. yana da mahimmanci don tabbatar da cewa zaku iya samun samfuran da ake buƙata. SiSiC: Taurin Moh shine 9.5 (New Moh's hardness shine 13), tare da kyakkyawan juriya ga yashwa da lalata, kyakkyawan abrasion - juriya da anti-oxidation. Yana da ƙarfi sau 4 zuwa 5 fiye da nitride bonded silicon carbide. Rayuwar sabis shine sau 5 zuwa 7 fiye da kayan alumina. MOR na RBSiC shine sau 5 zuwa 7 na SNBSC, ana iya amfani dashi don ƙarin sifofi masu rikitarwa. Sawa yumbu mai juriya yana aiki don inganta aikin samarwa, dacewar aiki, rage farashin kulawa da karuwar riba.

    Madaidaicin tukwane suna da ilimin kayan aiki, ƙwarewar aiki da ƙwarewar injiniya. Wannan zai iya yadda ya kamata tabbatar da cewa mafi kyau mafita suna miƙa wa abokan ciniki. Silicon carbide yumbura fale-falen buraka da rufi galibi ana amfani da su a aikace-aikace kamar guguwa, bututu, chutes, hoppers, bututu, bel na jigilar kaya da tsarin samarwa. A cikin tsarin, akwai abubuwa masu motsi suna zamewa a saman. Lokacin da abu ya zame akan wani abu, a hankali yana cire sassan har sai babu abin da ya rage. A cikin manyan wuraren lalacewa, wannan na iya faruwa akai-akai kuma yana haifar da matsaloli masu tsada. Babban tsarin yana riƙe ta hanyar amfani da abu mai wuyar gaske, kamar siliki carbide yumbura da yumbu na alumina azaman rufin hadaya. A lokaci guda, yumbu na siliki na carbide na iya jurewa lalacewa kafin ya buƙaci maye gurbinsa, rayuwar sabis ɗin yumbu na siliki carbide shine sau 5 zuwa 7 fiye da kayan alumina.

    Tiles na Silicon Carbide (2)

    Saka ResistantSilicon Carbide Ceramic Tiles & Abubuwan Rufe:
     Mai jure wa sinadarai
     Wutar lantarki
     Mechanical yashwa & abrasion resistant
     Mai maye gurbinsa

    Amfanin yumburaMai juriyaTiles & Lining:
     Ana iya amfani da shi a inda ake buƙatar juriya mai tsauri ko bakin ciki
     Za a iya amfani da shi don sake farfado da wuraren da ake fama da lalacewa
     Ana iya amfani da shi tare da hanyoyin haɗin kai da yawa kamar walda da adhesives
     Musamman da aka ƙera don takamaiman aikace-aikace
     Mai jure lalata
     Maganin rage lalacewa mara nauyi
     Yana kare sassa masu motsi waɗanda ke ƙarƙashin yanayin lalacewa
     Mahimmanci wuce gona da iri & fin karfin rage lalacewa
     Matsakaicin matsakaicin zafin amfani da ya kai 1380°C

      mmexport1532414574091

     

    1. Karfe masana'antu

    Tsarin isarwa: dabaran guga Bai, faifai, hopper Du, silo, bel mai ɗaukar bel, trolley Tee, karɓar hopper

    Batching tsarin: hadawa silo, primary Dao hadawa Silinda, sakandare hadawa Silinda, hadawa Disc, hadawa drum, scraper, pelletizing farantin.

    Sintering tsarin: beneficiation hopper karkashin vibrating allo, albarkatun kasa sufuri chute, cyclone kura tara da bututu, fan impeller

    2. Masana'antar siminti:

    Tsarin murkushe limestone da tsarin tsarin tsarin homogenization na mai da mai: chute, hopper, bel drum

    Raw niƙa tsarin: separator jagora vane, SEPARATOR mazugi, a tsaye niƙa zuwa cyclone tube, cyclone, man fetur niƙa (karfe ball niƙa), SEPARATOR gidaje, ciki mazugi, pulverized kwal bututu

    Man niƙa (ƙarfe ball niƙa): SEPARATOR gidaje, ciki mazugi, pulverized kwal bututu, foda mayar bututu

    3. Masana'antar tashar jiragen ruwa

    Kafaffen hopper don berth, hopper don injin motar guga, kafaffen hopper don tashar canja wurin bel, hopper don saukar da jirgi

    4. Masana'antar narkewa

    Tsarin isar da saƙo: chute head, silo (tsakiyar bin, wutsiya bin), kwandon allo mai girgiza, coke hopper, hopper mai aunawa

    Tsarin batching: batching hopper, firamare (na biyu) mahaɗin

    Tsarin gasasshen: famfo guda ɗaya, bututun calcine, hopper batching, hopper ash, matsakaicin bin hopper

    5. Masana'antar sinadarai:

    Tsarin watsawa: hopper, silo

    Tsarin kawar da ƙura: bututu mai cire ƙura, gwiwar hannu, fan casing da impeller, guguwa

    6. Masana'antar kwal:

    Tsarin sarrafa kwal: chute, hopper, silo

    Tsarin wanki na kwal: guguwar da aka matsa, mara matsa lamba samfurin uku mai nauyi matsakaici mai nauyi, mara matsa lamba huɗu samfurin matsakaici mai nauyi, ƙungiyar cyclone mai ƙarfi

    Tsarin watsawa: bututu, gwiwar hannu, bututu, hopper, silo, tashar rarraba

    7. Ma'adinaimasana'antu:

    Hydrocyclone, spigots, koli, bututu, gwiwar hannu, lankwasa

     

    Ceramics na Refractory
    Saka Resistant
    Cyclone Rarraba Mine
    Kunshin PU
    Polyurethane mahadi
    Sisic Layin Karfe
    yumbu mai jujjuyawa
    SISIC kambun kariya
    Hannun kariya na RBSIC
    Silicon Carbide Burner Nozzle
    Silicon Carbide Nozzle Tube
    E-Sigari Na'urorin haɗi
    Ceramics na Refractory
    Killin Furniture
    Babban Juriya na Zazzabi
    Reaction Bonded Silicon Carbide
    Kayan aikin kariya na soja
    Anti huda
    Kariyar Kariya
    Mai juriya
    Bakin Karfe
    Wanda aka yi a China Wear-Resistant Ceramics Compound Polyurethane
    China Compound PU
    China Compound Polyurethane
    Alumina Ceramic
    Tube
    1650c Babban Zazzabi Sic Tube
    Anyi a China Wear-Resistant Ceramic Composite PU
    Babban Presicion Silicon Carbide Ceramics
    Babban Tsabta Silicon Carbide Ring
    Sassan yumbu na Silicon Carbide mara ka'ida
    Abubuwan yumbura
    Silicon Carbide Ceramic Fittings
    Na'urorin haɗi na yumbura
    Anyi a cikin China Wear-Resistant Ceramic Composite Sisic Lined Karfe
    Sashin yumbura
    Anyi a cikin Jumla na China Certified Wear-Resistant Ceramic Composite Polyurethane
    Babban Tauri
    92% Alumina
    Anyi a cikin masana'antar China mai jurewa yumbu hade da polyurethane

     


  • Na baya:
  • Na gaba:

  • Shandong Zhongpeng Special Ceramics Co., Ltd yana daya daga cikin manyan sabbin kayan yumbu na silicon carbide a cikin kasar Sin. SiC fasaha yumbura: Moh's taurin ne 9 (New Moh ta taurin ne 13), tare da m juriya ga yashewa da lalata, m abrasion - juriya da anti-oxidation. Rayuwar sabis na samfurin SiC shine sau 4 zuwa 5 fiye da 92% kayan alumina. MOR na RBSiC shine sau 5 zuwa 7 na SNBSC, ana iya amfani dashi don ƙarin sifofi masu rikitarwa. Tsarin zance yana da sauri, isarwa kamar yadda aka yi alkawari kuma ingancin ba shi da na biyu. Kullum muna dagewa wajen kalubalantar manufofinmu da mayar da zukatanmu ga al'umma.

     

    1 SiC ceramic factory 工厂

    Samfura masu dangantaka

    WhatsApp Online Chat!