Imveliso yemveliso yemveliso kunye netafile
Iiparamitha zobugcisa ze-SISICON CACBID TUBE / SIC Cyclone zinxibe i-Liner Bush:
Into | Iyunithi | Idatha |
Ubushushu | ºc | 1380 |
Ukuxinana | g / cm³ | ≥3.02 |
Vula i-perasity | % | <0.1 |
Ubungakanani bukaMoh bobunzima | 13 | |
Ukugoba amandla | Mpa | I-250 (20ºC) |
Mpa | I-280 (1200ºC) | |
Imodyuli ye-elasticy | I-GPA | I-330 (20ºC) |
I-GPA | I-300 (1200ºC) | |
Ukuqhubela phambili kwe-thermal | W / mk | 45 (1200ºc) |
Ukusebenza kolwando lwe-shirmal | k-1× 10-6 | 4.5 |
Acid Alkaline -proof | Ngokugqwesileyo |
Q: Ngaba uyinkampani yokuthengisa okanye umvelisi?
A: Singumzi-mveliso.
Q: U-odola njani i-silicon carbide tubes?
A: 1) Okokuqala, nceda usixelele ubungakanani kunye nobungakanani kwiinkcukacha. Emva koko siza kuqwalasela zonke iinkcukacha. Emva koko siya kwenza i-PI (i-ivoyisi ye-proforma) ukuze uqinisekise iodolo. Nje ukuba ubhatale, siya kuthumela iimpahla kuwe ASAP.
2) Iimveliso ezenziweyo, nceda usithumelele uyilo lwakho lokuzoba kwaye usixelele isicelo sakho ngeenkcukacha. Emva koko siya kusebenza ngexabiso kwaye sithumele ikowuti kuwe. Emva kokuqinisekisa i-odolo kwaye ulungiselele intlawulo, siya kutyhila imveliso ye-bulk kwaye sithumele iimpahla kuwe ASAP.
Q: Kutheni ukhetha iZhida njengomthengisi?
A: 1) Umenzi othembekileyo nonobungcali.
2) Indawo yeZiko eliPhambili kunye nomsebenzi onobuchule.
3) Ixesha lokukhokelela ngokukhawuleza.
4) Inkonzo yabathengi kunye nolwaneliseko yinto yokuqala yethu yokuqala.
Q: Lingakanani ixesha lakho lokuhambisa?
A: Ngokubanzi ziintsuku ezi-1-2 ukuba iimpahla zikwisitokhwe. Kunye neentsuku ezingama-35 zokuyilwa ngokwezifiso, ukubonda ngoku-odola ubungakanani.
Q: Iphi intengiso yakho ephambili?
A: Sithunyezwe e-USA, iKorea, e-UK, iRrance, iRussia, i-India, i-Spain, i-Entiya, ikwanokungafakwanga kubathengi bethu.
Q: Kuthekani malunga nephakheji?
A: Sipakisha ngephepha le-bubble yeplastiki, ibhokisi yebhokisi, emva koko ibhokisi yokhuselo ekhuselekileyo ngaphandle, sinokulawula ukuqhekeka kungaphantsi kwe-1%
IXESHA LOKUQALA: UJan-07-2021