Kedu ụdị taịlị silicon carbide seramiiki dị?

Nkọwa dị mkpirikpi:

Ihe jikọrọ silicon carbide (SiSiC ma ọ bụ RBSIC) bụ ezigbo ihe na-eguzogide ọgwụ, nke dabara adaba maka abrasive siri ike, irighiri irighiri ihe, nhazi ọkwa, itinye uche, akpịrị ịkpọ nkụ na ọrụ ndị ọzọ. Ọ na-ọtụtụ-eji na Ngwuputa ụlọ ọrụ, ígwè ụlọ ọrụ, coral nhazi ụlọ ọrụ, chemical ụlọ ọrụ, akụrụngwa-eme ụlọ ọrụ, n'ibu akara, n'elu sandblasted ọgwụgwọ na reflector wdg N'ihi ndị magburu onwe hardness na abrasive eguzogide, ọ nwere ike ...


  • Port:Weifang ma ọ bụ Qingdao
  • Isi ike Mohs ọhụrụ: 13
  • Isi akụrụngwa:Silicon Carbide
  • Nkọwa ngwaahịa

    ZPC - silicon carbide seramiiki emeputa

    Mkpado ngwaahịa

    mmeghachi omume bonded silicon carbide (SiSiC ma ọ bụ RBSIC) bụ ezigbo eyi ihe na-eguzogide ọgwụ, nke bụ
    karịsịa adabara ike abrasive, keadighi rarii ahụ, nhazi ọkwa, itinye uche, akpịrị ịkpọ nkụ na
    ọrụ ndị ọzọ. A na-ejikarị ya eme ihe na ụlọ ọrụ Ngwuputa, ụlọ ọrụ ígwè, ụlọ ọrụ nhazi coral, chemical
    ụlọ ọrụ, akụrụngwa-eme ụlọ ọrụ, n'ibu akara, elu sandblasted ọgwụgwọ na reflector wdg.
    Ekele maka ike siri ike na nguzogide abrasive, ọ nwere ike ichebe nke ọma akụkụ ebe ọ dị mkpa iyi
    nchebe, ka ọ dị ogologo ndụ ọrụ nke akụrụngwa.  

    Kedu ụdị taịlị silicon carbide seramiiki dị?

    Taịlị Nkịtị nha
    Akụkụ Mba. Tile dị larịị Qty/㎡ Akụkụ Mba. Taịlị weldable Qty/㎡
    A01 150*100*12mm 67 B01 150*100*12mm 67
    A02 150*100*25mm 67 B02 150*100*25mm 67
    A03 228*114*12mm 39 B03 150*50*12mm 134
    A04 228*114*25mm 39 B04 150*50*25mm 134
    A05 150*50*12mm 134 B05 150*100*20mm 67
    A06 150*50*25mm 134 B06 114*114*12mm 77
    A07 100*70*12mm 134 B07 114*114*25mm 77
    A08 100*70*25mm 134   Tile trapezoid  
    A09 114*114*12mm 77 C ahaziri  
    A10 114*114*25mm 77   Taịlị mmetụta  
    A11 150*50*6mm 267 D ahaziri  
    A12 150*25*6mm 134   Tile nkuku  
    A13 150*100*6mm 67 E ahaziri  
    A14 45*45*6mm 494   Taịlị hexagonal  
    A15 100*25*6mm 400 F01 150*150*6mm 45
    A16 150*25*12mm 267 F02 150*150*12mm 45
    A17 228*114*6mm 39   Taịlị/efere ndị ọzọ  
    A18 150*100*20mm 67 G ahaziri  

    sdr

    Kedu ka esi amata ma chọta akwa silicon carbide wear-eguzogide efere, taịlị, liners?

    Silicon carbide tiles na-eguzogide, liners, ọkpọkọ na-aghọwanye nke a na-ejikarị eme ihe na ụlọ ọrụ Ngwuputa.

    Isi ihe ndị a bụ maka ntụnye aka gị:

    1. Usoro na usoro: 
    Enwere ọtụtụ usoro SiC n'ahịa. Anyị na-eji ezigbo akwụkwọ Germans. N'ime ule ụlọ nyocha dị elu, ngwaahịa anyị Erosion ㎝³ ọnwụ nwere ike iru 0.85 ± 0.01;

     

    2. Isi ike:

    SiC tileA na-emepụta ya na ZPC: hardness Mohs ọhụrụ: 14.55 ± 4.5 (MOR, psi)

     

    3. Njupụta:

    Oke njupụta tile ZPC SiC bụ ihe dịka 3.03+0.05.

    4. nha na elu:

    SiC tileemepụtara na ZPC na-enweghị mgbawa na pores, nke nwere ebe dị larịị na akụkụ na akụkụ na-adịghị mma.

    5. Ihe dị n'ime:

    Silicon carbide liners/taịlị na-eguzogide mkpuchi nwere ezigbo ihe dị n'ime na nke mpụga.
    Ọ bụrụ na ajụjụ ọ bụla, biko nweere onwe gị ịkpọtụrụ anyị:[email na-echebe]
    Nkọwapụta:

    Ihe

    Nkeji

    Data

    Okpomọkụ nke ngwa

    1380 ℃

    Njupụta

    G/cm3

     3.02

    Mepee porosity

    %

    0.1

    Ike na-ehulata -A

    Mpa

    250 (20 ℃)

    Ike na-ehulata -B

    MPa

    280 (1200 ℃)

    Modul nke elasticity-A

    GPA

    330 (20 ℃)

    Modul nke elasticity -B

    GPA

    300 (1200 ℃)

    Thermal conductivity

    W/mk

    45 (1200 ℃)

    Ọnụọgụ nke mgbasawanye thermal

    K-1 ×10-6

    4.5

    Isi ike

    /

    13

    Acid-proof alkaline

    /

    magburu onwe ya

     1. Echiche ụlọ ọrụ

    Ụdị na nha dị:
    Ọkpụrụkpụ: site na 6mm ruo 25mm
    Ụdị oge: SISIC efere, SISIC Pipe, SiSiC Njikọ atọ, SISIC elbow, SISIC Cone Cyclone.
    Nkọwa: nha na udi ndị ọzọ dị na arịrịọ.
    Nkwakọ ngwaahịa: 
    N'ime igbe katọn, juru n'ọnụ na pallet osisi fumigated nwere net dị arọ 20-24MT/20′FCL.
    Uru ndị isi:
    1. Mgbochi na-eyi nke ọma, mmetụta nkwụsị na nkwụsị nke corrosion;

    2. Magburu onwe flatness na magburu onwe okpomọkụ eguzogide ruo 1350 ℃
    3. Nrụnye dị mfe;
    4. Ogologo ndụ ọrụ (bụ ihe dị ka ugboro 7 karịa nke alumina seramiiki na 10 ugboro karịa nke ahụ)
    polyurethane

    Ụkpụrụ nke nkuku na-emetụta abrasion obere akụkụ na-amị amị
    Mgbe eruba ihe abrasive dara n'elu akwa akwa n'akụkụ na-emighị emi ma ọ bụ gafere ya na ya, ụdị uwe na-eme na esemokwu ka a na-akpọ abrasion sliding.

    Seramiiki silicon carbide dị elu na-enye nguzogide iyi na mgbochi corrosion ceramic tiles na lining. Achọpụtara ngwaahịa ndị a iyi akụrụngwa na mbufe, nhazi na usoro nchekwa. Anyị taịlị nwere ike na-emepụta na ọkpụrụkpụ si 8 ka 45mm. ọ dị mkpa iji hụ na ị nwere ike nweta ngwaahịa achọrọ. SiSiC: Ike siri ike nke Moh bụ 9.5 (Ike siri ike nke Moh ọhụrụ bụ 13), na-enwe ezigbo nguzogide mbuze na corrosion, ọmarịcha abrasion - nguzogide na mgbochi oxidation. Ọ dị okpukpu 4 ruo 5 ike karịa silicon carbide nitride bonded. Ndụ ọrụ bụ oge 5 ruo 7 karịa ihe alumina. MOR nke RBSiC bụ 5 ruo 7 ugboro karịa nke SNBSC, enwere ike iji ya mee ihe maka ụdị mgbagwoju anya. Ihe mkpuchi seramiiki na-eguzogide iyi na-eduzi iji mee ka arụmọrụ mmepụta ya dịkwuo mma, arụmọrụ na-arụ ọrụ, mbelata ụgwọ ọrụ na-abawanye uru.

    ceramik nkenke nwere ihe ọmụma ihe onwunwe, nka etinyere n'ọrụ na nka injinịa. Nke a nwere ike hụ na a na-enye ndị ahịa anyị ihe ngwọta kacha mma. Silicon carbide ceramic tiles na lining na-ejikarị na ngwa dị ka cyclones, tubes, chutes, hoppers, ọkpọkọ, ebufe eriri na usoro mmepụta. N'ime usoro ahụ, e nwere ihe ndị na-akpụ akpụ na-amịpụta n'elu. Mgbe ihe ahụ na-adaba n'ihe, ọ na-eji nwayọọ nwayọọ na-ewepụ akụkụ ahụ ruo mgbe ọ dịghị ihe fọdụrụ. N'ebe akwa akwa akwa, nke a nwere ike ime ugboro ugboro ma kpatara ọtụtụ nsogbu dị oke ọnụ. A na-edobe ihe owuwu bụ isi site na iji ihe siri ike, dị ka seramiiki silicon carbide na seramiki alumina dị ka mkpuchi ịchụ aja. N'otu oge ahụ, silicon carbide ceramics nwere ike idi ogologo iyi tupu ọ dị mkpa ka edochie ya, ndụ ọrụ seramiiki silicon carbide bụ oge 5 ruo 7 karịa ihe alumina.

    Yiri Silicon Carbide Ceramic Taịlị & Njirimara Ngwongwo:
     Chemical na-eguzogide ọgwụ
     Ihe mkpuchi ọkụ eletrik
     Mechanical ozize & abrasion eguzogide
     Enwere ike dochie anya

    Uru nke taịlị na ihe mkpuchi na-eguzogide ihe eji akwa seramiiki:
     Enwere ike iji ebe a na-achọ nnabata siri ike ma ọ bụ akwa akwa dị mkpa
     Enwere ike iji megharia ebe ndị nwere ike iyi
     Enwere ike iji ọtụtụ ụzọ mgbakwunye dị ka ịgbado ọkụ na nrapado
     Omenala emebere maka ngwa dị iche iche
     Nke ukwuu corrosion eguzogide
     Ihe ngwọta mbelata iyi dị arọ
     Na-echebe akụkụ ndị na-akpụ akpụ bụ ndị a na-eyi akwa gburugburu
     N'ụzọ pụtara ìhè na-aga n'ihu & na-emepe ihe ngwọta mbelata iyi
     Okpomọkụ ojiji kacha dị elu ruru 1380°

     


  • Nke gara aga:
  • Osote:

  • Shandong Zhongpeng Special Ceramics Co., Ltd bụ otu n'ime nnukwu silicon carbide seramiiki ihe ngwọta ọhụrụ na China. SiC technical ceramic: Moh's hardness is 9 (New Moh's hardness is 13), na ezigbo nguzogide mbuze na corrosion, ọmarịcha abrasion - nguzogide na mgbochi oxidation. Ndụ ọrụ ngwaahịa SiC bụ 4 ruo 5 ugboro ogologo karịa 92% alumina ihe onwunwe. MOR nke RBSiC bụ 5 ruo 7 ugboro karịa nke SNBSC, enwere ike iji ya mee ihe maka ụdị mgbagwoju anya. Usoro nhota dị ngwa ngwa, nnyefe dị ka e kwere ná nkwa na àgwà bụ nke abụọ na ọ dịghị. Anyị na-anọgidesi ike mgbe niile n'ịgba ebumnobi anyị aka ma na-enyeghachi obi anyị azụ n'obodo.

     

    1 SiC ụlọ ọrụ seramiiki 工厂

    Ngwaahịa ndị emetụtara

    Mkparịta ụka WhatsApp n'ịntanetị!